Rising stem gate valves
Rising stem gate valves have the threads external to the valve body. The gate valve stem is moving up when the valve is opening. Rising stem valves are usually made from cast or forged steel while non rising stem valves are more typically brass, bronze or cast iron.
Rising stem gate valves can be used in high pressure rating up to Class 2500 or up to 420 bar, while non rising stem gate valves are normally used for middle pressure rating.
In this way you can visually keep track of how far the valve is open. With a rising stem gate valve it is easy to tell if the valve is open or closed by looking at the amount of stem that is exposed. If the handle is flush with the pipe (no exposed stem), the valve is closed. If a lot of stem is exposed, the valve is open
API 600 ANSI Class 300 Cast Steel Gate Valve
API 600 ANSI Class 300 Cast Steel Gate Valve Heavy Duty Gate Valve Cast Steel Flanged ANSI 300 Sizes: 2" to 12" API 600 This flanged class 300 heavy duty gate valve with complete port provides durability across a broad spectrum of manufacturing apps, boiler facilities and rough surroundings. Handwheel gate valve works in ANSI 300 and provids minimal leakage and full service life. Designed for API 600 and API 598/EN12266-1 stress checked. Commonly..
Cast Iron Rising Stem Gate Valve
Cast Iron Rising Stem Gate Valve Cast Iron body Cast Brass seat Rising Stem Flanged PN16 Sizes 2" to 12" Pressure rating: PN10 Our Cast Iron Rising Stem Gate Valve fits between flanges of PN16 and is intended for general, industrial and HVAC applications; warm water, cold water and oils separation. Manual gate valve with X20Cr13 rising stem, Cast Brass seats, AISI 304 seat rings of Stainless Steel and GG25 Cast Iron body, wedge and yokes. This ..
Forged Steel Flanged Gate Valve
Forged Steel Flanged Gate Valve Our Forged Steel Flanged Gate Valve is appropriate for fitting flanges (subject to setup) between ANSI 150 or ANSI 300 and is intended for heavy duty, industrial and steam applications; steam, water, petroleum, vapors and gas. Manual flanged gate valve with rising stem, 316 Stainless Steel handle and body of steel A105N powered by a handwheel. Forged Steel Flanged Gate Valve Suitable to fit between ANSI 150 or ANSI 300 flanges ..
Forged Steel Gate Valve Class 800
Forged Steel Gate Valve Class 800 Class 800 Gate Valve Bolted Bonnet Forged Steel A105N body and bonnet Screwed BSP, NPT or Socket Weld Sizes 1/2" to 2" Temperature range: -29°C to 425°C. Pressure up to 138 bar This class 800 Forged carbon steel Gate Valve for heavy duty use is appropriate for the most challenging process apps. When the media is goes through it, minimum quantity of turbulence will flow and the pressure drop is very low. That's why thi..
Rising Stem Gate Valve - ANSI
ApplicationANSI Rising stem Gate valves are isolating valves designed for full closing or opening of working media flow. If the gate valves are used for regulating or throttling purposes, the manufacturer does not guarantee tightness of the gate valves. For regulation we recommend to use special control gate valve type S33.C.Working medium water non-corrosive liquids steam air gases of group 1 and 2 petroleum and petroleum products. The service fluids shall not contain ..
Rising Stem Gate Valve PN16 - PN100
Rising Stem Gate Valve PN16 - PN100 Application Rising stem Gate valves are isolating valves designed for full closing or opening of working media flow. If the gate valves are used for regulating or throttling purposes, the manufacturer does not guarantee tightness of the gate valves. For regulation we recommend to use special control gate valve type S33.C. Working medium - water non-corrosive liquids steam air gases of group 1 and 2 petroleum and petroleum produc..
Stainless Steel Flanged Gate Valve
Stainless Steel Flanged Gate Valve Our Stainless Steel Flanged Gate Valve fits between PN16 or ANSI 150 flanges (subject to setup) and is intended for insulation in chemical, corrosive and semi-aggressive liquid apps. A manual flanged gate valve with rising stem and CF8M body, cap and wedge which is powered by a handwheel. This stanless gate velve is offered in sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4", 5", 6", 8" This particular SS gate valve is s..