Oil Nozzles Type H, S-S, ES, P and B - Danfoss.com
extended embed settings
Data Sheet <strong>Oil</strong> <strong>Nozzles</strong> <strong>Type</strong> H, S-S, <strong>ES</strong>, P <strong>and</strong> B Application Identification Technical Data Design <strong>Danfoss</strong> Hago oil nozzles are designed for domestic <strong>and</strong> <strong>com</strong>mercial high pressure oil burners operating with light or heavy fuel. An optimal <strong>com</strong>bustion process is only achieved by a perfect match between nozzle capacity <strong>and</strong> spray pattern, air supply <strong>and</strong> air distribution <strong>and</strong> the design of <strong>com</strong>bustion chamber. The nozzles are marked with the following information (example): 0.65 60° SOLID Material <strong>and</strong> construction Nozzle tip <strong>and</strong> disc AISI 416 grade stainless steel filters size dependent Program For sizes available please refer to nozzle matrix in product overview, <strong>Oil</strong> Burner <strong>Nozzles</strong> Series - Steel. Re<strong>com</strong>mended tightening torque ▪ 200-310 in-lbs (25-35 Nm) for steel <strong>and</strong> nickel plated adapters ▪ 130-180 in-lbs (15-20 Nm) for brass nozzle adapters Maximum tightening torque ▪ 310 in-lbs (35 Nm) for steel <strong>and</strong> nickel plated adapters ▪ 220 in-lbs (25 Nm) for brass nozzle adapters A: Tip. B: Disc. C: Sintered filter. <strong>Danfoss</strong> Hago offers a very broad range of nozzles with different capacity <strong>and</strong> spray patterns – which means that it is possible to cover all dem<strong>and</strong>s in the market. Features: Light <strong>and</strong> heavy fuel. Stamped on the flats: 0.65 GPH at 100 psi, (∼ 7 bar) 35 SSU (2.7 cSt) 60° Spray angle SOLID SOLID for "Solid" spray pattern Batch code Filters A: Tip. B: Disc. C: Strainer. Capacity 0.40 – 1.35 GPH 30-40 µm sintered bronze filter Capacity from 1.50 GPH 120 mesh stainless steel strainer <strong>Danfoss</strong> Heating Solutions VDCEY202 © <strong>Danfoss</strong> 11/2012 1
Loading...
Magazine: Oil Nozzles Type H, S-S, ES, P and B - Danfoss.com