GROOVED FITTINGS
Grooved fittings are used for connecting Standpipe to control, distribute, or support pipeline in different sizes or directions. By groove connection, project time is saved a lot with fast installation and easy maintenance. TPMC supply grooved pipe fittings for fire fighting system.
TPMC provides grooved fitting in UL listed/ FM approved:
› Grooved elbow
› Grooved cross
› Grooved cap
› Grooved tee
› Grooved reducer
Grooved 90° elbow
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=1.0D
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G01
Grooved 45° elbow
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Type: Short radius, R=1.0D
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G02
Grooved 22.5° elbow
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G03
Grooved straight tee (Equal tee)
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G04
Grooved reducing tee
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G05
Grooved reducing tee with threaded branch
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT/ BSPT
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G06
Grooved straight cross (Equal cross)
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G07
Grooved reducing cross
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G08
Grooved reducing cross with threaded branch
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Branch: Female thread, NPT / BSPT
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G09
Grooved concentric reducer
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G10
Grooved concentric reducer with threaded run
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Minor run: Female thread, NPT/ BSPT
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G11
Grooved eccentric reducer
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref. No.: G12
Grooved end cap
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref.No.: G13
Grooved drain cap with concentric hole
- Certificate: UL Listed/ FM Approved
- Standard: ANSI/ UL 213C
- Material: Ductile iron as ASTM A536, 65-45-12
- Centre hole: Female thread, NPT/ BSPT
- Temperature: -30°C to 300°C
- W. pressure: 300PSI (2.07MPa)
- Surface: Red paint/ hot dip galvanized
- Ref.No.: G14